General Information ※ New firmware (ver. RB02) for only GSA-H44N(Internal 18X Super multi DVD Writer) ◆ Model:GSA-H44N ◆ Ver:RB02 ◆ Improvement Point. Improve writing quality for for recordable media Refer to the attached file. INSTRUCIONS GSA-H44N Version RB02 Firmware Update To update the firmware of the GSA-H44N please refer to the following instructions: Note: Not following the subsequent update instructions explicitly will result in permanent damage to your drive, for which LG will not be responsible. The drives must be original LG branded drives with the DVD Writer model number GSA-H44N(no OEM units). If you have an OEM unit, branded with another manufacturers name, please contact that manufacturer for support and firmware updates. This firmware update is for use only on PC's with Windows Vista, Windows XP and Windows 2000 Critical Instructions: (to be followed carefully) 1. Connect the drive as 'master' by it self, on the secondary IDE controller with no other device on the same IDE cable, making note to set the jumper on the back of the drive to the 'master' position. This download includes this 'Read me(ew)' text file, as well as the GSAH44NRB02.EXE program, which will auto-update your drive's firmware. (If these programs are not closed, they will try to engage the PC, during the update process, thus interrupting the update and damaging the drive).
4. Check the drive to ensure that there is no disk in the tray before you start the update procedure. 5. Go into the folder with the update file and double click the GSAH44NRB02.EXE program and Firmware upgrade will be automatically started. When the UPGRADE is complete the screen should indicate 'ReBoot' message and advise you to reboot the system. You will need to reboot your PC The update will be complete, after you reboot your system. WARNING: Do not open any programs or start any system functions during the update, as they will interfere with data transfer and damage the drive. Do not cancel the operation once it has been started or the drive will become permanently damaged, as a result.
Home » HL-DT-ST DVDRAM GH41N ATA Device Use the links on this page to download the latest version of HL-DT-ST DVDRAM GH41N ATA Device drivers. All drivers available for download have been scanned by antivirus program. HL-DT-ST DVDRAM GH41N ATA Device: Download: Microsoft. Why do I need to update drivers? How to install a driver manually? This website is not affiliated with.
The Driver Update Tool – is a utility that contains more than 27 million official drivers for all hardware, including hl-dt-st dvdram gh41n scsi cdrom device driver. This utility was recognized by many users all over the world as a modern, convenient alternative to manual updating of the drivers and also received a high rating from known computer publications. The utility has been repeatedly tested and has shown excellent results. This tool will install you the latest drivers for all devices on your computer.
Supported OS: Windows 10, Windows 8/8.1, Windows 7, Windows Vista. This utility contains the only official version for HL-DT-ST DVDRAM GH41N SCSI CdRom Device Driver for Windows XP/7/Vista/8/8.1/10 32-bit and 64-bit versions. With just one click you can update the driver as well as the rest of the drivers in your system, such as:. Monitors. Audio & Sound. Graphics & Video Adapters.
Modems & Network Adapters. Printers. Scanners. Optical Disk Drives.
Other Devices This utility works in two simple steps: 1. Automatically identifies your Hardware. Downloads the latest official version of the drivers for the Hardware and installs them correctly.
This method allows you to save your time and correctly install all necessary drivers, not being afraid to make a mistake during a manual installation.
Comments are closed.
|
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |